Release history

What’s new in Grainwork.

Release notes, improvements, and fixes, straight from the team.

Releases92since April 14, 2026
Changes shipped684new, improved and fixed
A release every2.0 dayson average
Busiest monthSeptember2026 · 192 changes
Every day we shipped

October 2026

v0.63.0 to v0.74.0
13 releases · 139 changes
v0.74.0

Ceilings, walkthrough and connected AI assistants

New
  • Ceilings: flat, sloped, cathedral or custom, split into sections. Walls can meet the ceiling and follow its slopes, cabinets that reach into it are warned, and the ceiling draws in plan, elevation, 3D, shared links and drawing sets
  • Walk through a room in 3D with person height and arrow keys, also in customer share links. Photo view has automatic indoor lighting
  • Use Ask Grainwork from your own Claude or Codex: connect it under Integrations and manage it in Connected apps
  • Top corner blocks: a fourth top type with a triangle block in each top corner
  • Routed pulls cut with a chosen bit, J-groove and bevel pulls on the edge profile pass, and insert pulls
  • Simple or Detailed cabinet names; new shops start on Simple, named from the preset
  • Print nest sheets as pages
Improved
  • Cut direction is set per tool, and a tool with no answer cuts conventional. Saved nests rebuild once after this update
  • Applied molding on wall treatments has profiles (square, beveled, rounded, ogee, bead and cove) with a cross-section preview, and so do baseboard, chair rail and cap
  • Crown, baseboard, toe skin, light rail and wall cabinet tops and bottoms can match the cabinets or take their own finish
Fixed
  • A page could keep refreshing itself after reconnecting
v0.73.0

Appliances, wall treatments and global search

New
  • Appliances drawn from their look: 12 types including washer, dryer, warming drawer and microwave drawer, with panel-ready fronts in the cabinets' finish. Start from ready-made sizes; a 3D model is optional, made from a photo, the library or a written description
  • Wall treatments: shiplap, beadboard, board and batten, wainscot, applied molding and slats, per wall face or as a room default, with lower and upper sections and shop presets
  • Global search in the header (Ctrl+K) for projects, customers, notes, libraries and Admin pages, with your recent items
  • Electrical obstructions drawn as real outlets, switches and regional sockets, including 240 V range and dryer outlets
  • Call or text Grainwork from the help panel
Improved
  • Line bore spacing can be measured from the far end or from both ends
  • A loose toe kick can run the full cabinet depth and take recesses
Fixed
  • Renaming a project from its menu, long SKUs wrapping, note arrowheads drawn backwards, and undo in the preset designer
  • Custom parts: their edgebanding, depth, and how they draw in the cabinet side view
v0.72.0

Shop mode and filler wall oversize

New
  • Filler faces can be oversized where they meet a wall, with the extra hidden or visible
  • Choose how you sign in by default (password or emailed code) in your profile
Improved
  • Shop floor: sheet pages, plus clearer part names, labels and navigation in shop mode
Fixed
  • Saving a hinge from the catalog did not keep its changes
  • Settings tabs opened wherever the last tab was scrolled to
v0.71.0

Shop floor and machining fixes

New
  • Cut direction per machine: climb or conventional, for outlines, dados and pockets
  • Ignore grain on a component, so nesting can turn the part to save material
  • Leveler plates can be chosen per cabinet, and leveler holes can drill through
  • Output batches can be shared
Improved
  • HOMAG machines cut two-sided parts by default
  • Drawer systems import with 16 mm board components
  • Shop floor: part names, a label band, direction arrows, one label at a time, and Esc and idle handling. Opening a cabinet again goes back where you were
  • A filler's partial return is measured from behind its own face
Fixed
  • A standard that never answered nailer Include showed Yes but built no nailer
  • Offcut trims could cut into parts, and a split on retract was posted wrong
  • CAD drawing snapped to the line being drawn
  • The part picker in the part page breadcrumb broke when used
v0.70.0

Loose toe kicks, plate holes on by default

New
  • Loose toe kick: a separate toe frame the cabinets stand on, with dividers under their ends
  • Leveler mount holes, with a choice of what they mount to
  • Material stock thickness: record the thickness you measured, with its history
Improved
  • Hinge plate holes drill by default, and every shop's existing plates are switched on
  • A hinge that cannot solve still drills the default plate, and warns
  • Snapping to holes and cuts in the cabinet front and side views lands on the operation itself
  • Toe frame floor gap and toe divider orientation settings
Fixed
  • Filler joinery rules reached ordinary cabinets and pushed unfinished ends 1/8 in past the front
v0.69.0

Hinge placement per door, flush with the doors next door

New
  • Set a door's own hinge placement: top and bottom spacing and the number of hinges, from Customize placement on the hinge picker. It warns when a count you force spaces the hinges wider than the hinge allows
  • Flush with doors on fillers and panels takes its offset from the doors on the cabinet beside them, or from the standard's door offset when that cabinet has no doors
Improved
  • Catalog hardware sizes are stored at the exact millimetres or inch fractions the makers publish (37 mm instead of 1.457 in). Shops get this as a catalog update
Fixed
  • Starter drawer guides sold by the pair counted as one piece, so each drawer was priced as two pairs
v0.68.0

Welcome page for the Grainwork app

New
  • The installed Grainwork app opens on a welcome page when you are signed out, instead of the bare sign-in form
Fixed
  • Adding a sink skirt's separator could sort it alongside the first divider instead of as the newest one
v0.67.1

Hinges below sink skirts

Fixed
  • A door's top hinge could land behind a sink skirt. It now moves down below the skirt
  • Moving catalog hardware to production failed with Production changed after preview whenever a value had many decimal places
v0.67.0

Sign-in codes, arrange a sheet, walls that follow the room

New
  • Sign in with a one-time code emailed to you, beside Forgot password
  • Arrange a nested sheet by hand
  • Part layout on each machine: Compact fills open spaces, Rows lines parts up across the sheet
  • Walls follow the room's height and thickness until you change them, and a wall can be centered on another with an offset
  • Drawer systems get their own page with cut rules and lengths, plus catalog updates for drawer systems and their heights
  • Fireplace surround and insert options, and length fields on furnishing options
  • Rabbets and tenon cheeks that open onto the part edge can be cut with a wider bit, past the edge
Improved
  • A TANDEMBOX bottom follows the back: its length is the drawer length less 8 mm less the back's actual thickness
  • The starter template butts sink skirts and drawer stretchers by default
  • Signing in after a shop removes you says which shop, instead of saying the account is not linked to a company yet
  • The sign-in and forgot password emails say they only arrive if the address has an account
  • Countertop side splashes show in elevation
Fixed
  • Reset password links signed you in instead of letting you set a new password
  • Linked outline sweeps could ramp into the next part
  • Clicking a furnishing in elevation did not select it
v0.66.0

Before you cut, door operations, sink skirts

New
  • Before you cut: one list before nesting of everything that will not cut as expected, with a fix for each. Holes no drill can make block the nest until you choose to cut without them
  • Too big for the sheet: parts that will not fit are caught before nesting, with Turn the grain or Leave out
  • Holes with no drill: a machine can cut holes with a router bit when no drill matches. Off by default, with a Hole sizes card showing which holes each machine can make
  • Door standards can carry pull and hinge holes, with overrides for a project, room or cabinet
  • Sink skirts: sink base openings get a skirt, cut around the stretcher, with dividers running to the top
  • Toe rails can be bored into the ends, and an end can run past the toe face
  • Programs: filter by part type, and include or exclude parts
  • Drawer boxes: set the bottom height, and let a guide set its own top and bottom clearance
Improved
  • Programs cut at the material's real stock thickness, with a warning when the two disagree
  • Part setup can record banding as before or after machining
  • The cabinet and part pages show hinge plate holes the same way the nest cuts them
  • Joinery for dividers and stretchers: run-through choice, stretcher seats under the top, and a warning when a joint has no rule
  • Top rails are named Front and Rear on cut lists and labels
  • Admin tables remember their tab, filters, search and sort
  • Drawer box warnings for a notch that is too deep and for bottoms not in a dado
Fixed
  • A top, bottom or rear rail joined to the back with a dado stopped on the back's face instead of seating into its groove
  • Holes listed beside a dado on the same rear joint were never drilled into the back
  • A banded door showed No edgebanding in part properties
  • Small room plans cut off their outside dimensions
  • Countertop backsplashes drew inside the wall in 3D
v0.65.0

Pulls and knobs, drawer systems

New
  • Pulls and knobs: pick pulls for a project, room, area or a single front, with a hardware finish and size rules that choose the pull size from the front's width
  • Bar pulls, knobs, edge pulls, routed pulls and push latches, drawn in 2D and 3D
  • Pull holes go to the nest, with the bore face and depth set on each machine, and a Holes column on the shop hardware worksheet
  • Warnings when a pull's screws miss the front, or a pull hits a wall or the cabinet next to it
  • 50 pulls from Top Knobs, Amerock, Richelieu and Häfele in the system catalog
  • Change pulls on several fronts at once from the room panel
  • Drawer systems: build a drawer box type as a metal drawer system instead of a wood box, starting with Blum TANDEMBOX for Australia and the US, with the right sizes, hardware lines and guide holes
  • Saving a cabinet as a preset lists each override, so you can keep it or leave it out
  • Standards: Levelers and Output answers can differ by unit type, and Scribe, Sub end, Reveals and shelf spacing get unit type tabs too
  • The room Warnings list now includes cabinet warnings, with links to the part, the cabinet or the standard
Improved
  • Shelf pin holes and hinge plate holes reach the nest and room reports, not only the cabinet page
  • Shaped door outlines carry through to the nest
  • A deck's rear joint shows as one card on the Back, and decks and dividers get a No back card
  • Duplicating a standard copies its Output settings, rule branches and material overrides
  • The machine test cut remembers the material you last picked
  • Cabinet Vision import skips empty "no joint" bores, and asks you to confirm each field typed into label text
Fixed
  • A toe rail dadoed into the cabinet end cut a flat groove across the whole end
  • Back-to-end and deck-to-back construction holes were never drilled
  • Room reports and the nest could pick a drawer guide from the wrong guide map
  • Adding or removing a countertop corner mixed up the other corners, and removing the last corner crashed
  • Drawing set elevations missed cabinets on the back face of an island
  • Room warnings showed a false 1 mm overlay on doors
  • The preset designer's preview materials could wipe a cabinet's interior
  • A filler sub-type's designer preview built as an ordinary box
v0.64.0

18 Brand Libraries, Adjustable Furnishings and One Countertop Type

New
  • 18 more brands in the material library: decors from Uniboard, Tafisa, Formica, Wilsonart, Finsa, Shinnoki, Fenix, Ultrapan, AGT, 3form, Cleaf, Arauco, Stevens Wood, Polytec and Salt, and countertop colors from Cambria, Corian and Meganite
  • 45 more wood species, each with a description and its natural color over a grain-only image
  • Furnishings with options: a bath set, window treatments and doors you set up from a popup, and shelf fill for closets
  • Voice messages in support requests
  • Cabinet Vision import brings in door profiles too
Improved
  • Countertops are one material type, and the material says what it is made of (quartz, granite, butcher block) instead of eighteen near-identical types
  • Toe height follows your construction standard until a job sets its own, so changing it in the standard reaches your jobs
  • A new project version or a restore keeps its options, cabinet answers and annotations
  • Cabinet warnings name what is wrong, with Show part, Use default and Open standard
  • New shops start with cleaner starter data: settings that were left behind now come along, and garbled degree and dash signs are fixed
  • A request we plan to build is marked Planned, so you can see it is coming
Fixed
  • Anderson programs feed every arc at the set speed; an arc right after a plunge ran at the plunge feed
  • The standards editor, its preview and the settings panel agree on which branch's answer applies
v0.63.0

Grain Only Textures, Back Rabbets and the Anderson Selexx Eco

New
  • A material picker with swatches, and a texture's natural color shown with it
  • "Grain only" textures: the gray is taken out of the image, so a finish color shows true instead of muddied
  • Back rabbet: run the back's groove out the rear of the ends, top or bottom so it holds the back and the scribe behind it, with seats and holes for the nailer
  • Doors applied to a finished end can stop short of each edge, set on the standard or per end
  • Short fronts can take narrower top and bottom rails
  • Draw a custom bit's outline point by point. Shaped bits from a Cabinet Vision import come in as custom bits
  • Anderson Selexx Eco 2513, with its own program format, and routers that run in millimetres
  • An offline page and an Offline badge when your connection drops
Improved
  • Built-in door profiles are drawn at the depth they cut, so a thinner door no longer says the profile is taller than the stock
  • Door middle rails and stiles take their material from the Frame folder like the rest of the frame, so they no longer come out with no material
  • Show all parts or the face only from the cabinet strip
  • Support replies, reminders and the morning recap reach our team sooner
Fixed
  • A room refreshes when its doors' material maps change, and picking a species reaches the doors
  • Reconnecting after the app sits idle no longer loses who else is in the room

September 2026

v0.46.0 to v0.62.0
19 releases · 192 changes
v0.62.0

Cabinet Vision Import, Table Saws and AXILO Hinges

New
  • Cabinet Vision import: upload your Setup Packages and bring in materials, constructions, drawer boxes and labels. You see what is new, what matches and what differs, and nothing reaches your library until you confirm it
  • Table saws as a machine type, and any machine can be limited to the materials it cuts
  • AXILO hinges and Häfele 637.45 levelers
  • Drawer guides that screw down into the bottom or a shelf, like Blum MOVENTO and Fulterer bottom rollers
  • Hinge plates fastened with Euro screws, the way Grass and Salice sell them
  • Choose which team members can pay for extras, like a paid support call, with the shop's card
  • Terms and Privacy sections for shops outside the United States (Australia, Canada, the EU, Israel, New Zealand and the UK), and a Data Processing Addendum
Improved
  • Support emails wait a few minutes and go out together, and skip anything you already read in the app
  • If a booked call is missed, you can pick a new time within 14 days and what you paid covers it
Fixed
  • Metric lengths come back exactly as entered: 18 mm stays 18 mm instead of 18.001 mm
  • A nest holding toe skin, light rail or cap pieces no longer fails
  • Ticking Laminate under what a machine cuts no longer fails to save
v0.61.0

Post Versions, Paid Calls and Call Chat

New
  • Post versions: each machine knows which version of our post it runs and what your shop changed on top of it. A new version waits on the machine page with its notes and a preview of the program, and you can always go back to ours
  • Cut sizing: let the machine's own tool table size each cut, the way most shops' programs already run, with a finish allowance. Schlabach's SCM M400 now cuts this way to match its own programs; Anderson Selexx offers it once the tool table is loaded and a test part is cut
  • Paid support calls: a call type is free or charged at one hourly rate, and support can send a "Pick a time" link, free if we choose
  • Chat inside a support call, kept on the call's page next to the recording and transcript
  • Add people or add time during a call without leaving the room
  • Material maps can apply to a construction type or a standard, each with its own default
Improved
  • Call types can be as short as 5 minutes
  • Tool shapes get their own editor on the tool page
  • Anderson Selexx programs reset and park the way the shops' own programs do
  • AXILO leveler feet and plates carry corrected sizes and descriptions, and draw true to size in 3D
  • A false front has no pull unless you add one to it
  • The standard preview says which materials it is missing instead of drawing an unfinished part
  • Ask Grainwork knows the AES ISAC posts
Fixed
  • Adding a machine without typing a short code no longer fails
v0.60.0

Program Names, AES ISAC and Corner Bars

New
  • Name your programs the way your machine wants them: a template per machine, with the character set and a length limit, and sheet numbers that run in order
  • AES ISAC joins the machine list, standalone or as the ISAC automatic line, which downloads .anc programs with numbered labels in a RUN folder
  • Frame top: a bar across each corner, on its own switch beside bars by spacing and bars at dividers. A top that turns gets them, a rectangle is unchanged
  • Support shows the week's hours at a glance, with the days we are closed
Improved
  • A new release rings the bell once the new version is actually serving, so the changelog you open has the release on it
  • Nailers follow a shaped back, one run per back, and the clipped corner takes none
Fixed
  • A laptop that slept with a tab open no longer bills the sleep as design time, and the sessions that already did are capped
v0.59.0

Hinge Choice, Outline Bits and Calls of Their Own

New
  • Hinge choice per door: each door takes the standard hinge, or you pick one for it, and the BOM, bores, swing limits and 3D model all follow
  • AXILO leveler feet and their mounting plates, with the plate's bore prep
  • Drawer guide sizes read from the guide's own model, so a series shows the sizes it really has
  • Frame top: a third top type, a full top with the opening cut through it
  • False fronts: turn a drawer's box off and keep the front. Elevations mark it with a dashed X and reports count it as a front
  • Outline bits: say which bit cuts each part, by material, species, core, thickness, grain matched or small part, and the sheet spaces parts by the bit that cuts them
  • Light rail, toe skin and end caps drawn along a run, three ways: build them for a room, pick them off the palette, or draw one where you want it, with the end treatment set per run
  • Support calls stand on their own: a Calls tab and a page for each call, apart from messages. Anyone who cannot use computer audio can call in by phone with their own PIN. Staff run them from Support admin, with call types and scheduling
  • Deleting a library item now shows where it is used and offers a replacement, and a project missing an item says so before it goes to output
  • Ask Grainwork reads your help articles, the changelog and the glossary, and you can rate an answer
Improved
  • Grain matching lines a stack up across an elevation and reports where a run drifts
  • A door edge shows its banding or its core, never its face, in every view
  • Help search matches any word in an article, not just the phrase
  • Machine posts take per-brand options, and SCM Xilog programs come out with real arcs
  • Dates and times show in your own time zone
  • A wording pass across the app
Fixed
  • On a face frame, a between reveal is measured from the middle of the rail or stile, so a 1-1/2" rail with a 1/8" reveal opens 1/8", not 1-5/8"
  • On a part split into pieces, joints, connectors and the small part rules follow each piece
v0.58.0

Hardware Catalog Versions, Call Recordings and Depth Callouts

New
  • Hardware catalog versions: what you import is a released version, and an update waits on the Hardware page with release notes and a diff against your current values, so nothing changes under you
  • Hardware models drop in with a guided placement check: pick the view that looks right instead of typing rotations, with advanced controls still there
  • Hardware shows in 2D as its own shape in cabinet and elevation views, not a symbol
  • Support calls can be recorded, with a transcript afterwards and a short feedback question at the end. Everyone on the call is told before it starts
  • Depth callouts: cabinet depth on elevation drawings on a diagonal leader, either at every cabinet or only where it changes
  • Annotation text can carry variables, like the cabinet number or a dimension, and text boxes resize
  • Cabinet numbering can start where you want it in a room
  • Several joint types on one joint: add dado plus construction holes, or a cam plus dowels, and the picker greys out what cannot share
  • A new release now rings the bell in the app, with what changed
Improved
  • Grain matching applies to a full elevation at a time
  • Walls: drag an end onto a neighbour to reconnect it, with loose ends ringed in amber, and Ctrl-drag to detach
  • Machine pages show cut strategy previews, and pockets cut with a spiral stepover
Fixed
  • The Blum 563F rear notch was 3 inches wide instead of 35 mm, in both the catalog and imports
v0.57.0

Grain Matching, Surfaces and Support Calls

New
  • Grain matching: let the nest keep a run of doors and drawer fronts in sequence off one board, or box the fronts you want matched yourself, set on a project, room, area or single cabinet
  • Surfaces: wall cabinet bottom and top caps are countertop pieces now, so they carry a material, show in reports, and cut on the machine when the material nests
  • Toe skin and light rail join crown and baseboard as molding kinds, with their own profiles
  • Molding standards hold a layer stack per kind, so crown, baseboard and light rail each get their own default build-up
  • Support calls: book a call with us from the help panel, or join an instant one, with voice, video and screen share in the browser
  • Machine program comparison: upload programs your shop already runs and see them side by side with ours
  • Set a tool number from the machine page for any tool that has none
Improved
  • Wording across the app, from standards questions to admin pages, rewritten to be plainer and consistent
  • Countertop and molding runs are ordinary machine parts, so caps and skins nest and appear in Machine Code with everything else
  • NewCNC machines carry their add-on slots, and a tool with no number is never written into a program
Fixed
  • Locking one opening's size stopped the other openings in the cabinet from being resized
v0.56.0

Unsaved Changes Warning and Fulterer Slides

New
  • Leaving a page with unsaved changes now asks first, across the admin editors and settings sheets
  • Fulterer drawer slides in the hardware catalog: 45 series of steel side-mount and bottom-mount slides, with their lengths and item numbers
Improved
  • Moving a point on a shape switches its template to Custom on its own, so you no longer have to pick Custom first
Fixed
  • Rooms kept showing the old door style after a door standard changed, until you reloaded
  • Typing fractions in length fields could get cut off mid-entry, and values could round when you left the field
  • Top stretcher joinery: stretchers that run past the end are now joined and bored correctly, and the left end's tongue now faces the right way
  • Some standards couldn't be opened in the editor
v0.55.0

Label Designer Upgrades, Small-Part Joinery and Beta Fixes

New
  • Label designer: snapping guides while you drag, align selected items, duplicate a label, and new label size presets
  • Drawer fronts can take the same per-opening overrides as doors
  • Small-part joinery: set the notches, bore offsets, spacing and bore count separately for parts too short for the normal joint
  • Live events: one default join link for every event, "Invite everyone" to send an event to all users, and a Notify me link that works straight from the email
  • Changelog timeline: releases grouped by month, with the pace of releases over time
Improved
  • Doors show their machined joints and detail lines in 2D and 3D
  • Resizing a cabinet in the plan keeps its parts, banding and doors visible, and stops at the same obstacles a move does
  • Resizing in the elevation stops at doorways, other cabinets and the uppers
  • Countertop runs follow straight sections, and nudging a countertop point sticks after a rebuild
  • The label designer keeps its add bar in view and fits the editor better
  • NewCNC machines use the correct 10-spindle boring head
Fixed
  • Dowel holes on part edges were drawn on the face in 3D
  • Edge bores could reach CNC and DXF output they shouldn't
  • The Machine Code parts list could show parts that had been deleted
  • Undoing a cabinet or wall delete did not redraw it until you reloaded
  • Filler fronts picked up a face frame they shouldn't have
  • A live event reminder could not be saved with the second reminder turned off
  • Release dates in the changelog showed the wrong year
v0.54.0

Machine Operator Screen and Scheduled Beta Weeks

New
  • Machine operator screen for the shop floor: a touch-friendly queue of saved nest runs, worked sheet by sheet, with labels and remakes as you cut
  • Beta weeks can be scheduled to publish at a set date and time, and drafts that are overdue are called out
Improved
  • The help panel keeps an unsent message and a running screen recording when you close it, so neither is lost
  • Background jobs run in separate lanes, so a long render or import no longer holds up everything else
Fixed
  • Live event reminders and beta week publishing were not running on schedule
  • Mitered wall ends now draw correctly in elevation views
  • Tightened database permissions that a September maintenance restore had left too open
v0.53.0

Edgebanders, Two-Sided Machining and Live Events

New
  • Edgebanders: add your edgebander as a machine, with its premill setting. Parts banded on a premilling bander are cut to full size so the bander mills them back to finished size
  • Pick a default edgebander for your shop, and choose the CNC, saw and edgebander for a run in Machine Code
  • Cut or Finished sizes: switch reports, the Shop tab and Machine Code between cut size and finished size, with a default for your shop and your own preference
  • Two-sided CNC machining: parts with work on both faces get a back-face program and a front-face program, with a flip step between them
  • Live events: see upcoming live sessions in the app, click Notify me to get reminders, and join from the top bar when an event is live
  • A "Before you join" guide shows the first time you join a live event
Improved
  • Machine Code shows where each part goes, its premill, and cut or finished size for the whole machine set
  • Rooms open faster, and material textures load with far fewer requests
Fixed
  • Banded parts were cut short on edgebanders that premill, by the amount the bander mills off
v0.52.0

Part Labels, RazorGage Saws and Right-Drag Panning

New
  • Part labels: design your own label layouts under Labels, then print labels from a saved nest run for one sheet, every sheet or a single part, in cut order
  • Print labels straight from the shop worksheets for panel stock, face frame parts, doors, drawer boxes and cabinets
  • RazorGage saws: add a RazorGage to your machines and export a cut list for it
  • Hinge overlay range: the hinge editor shows the overlay range each cup and plate combination covers, and suggests fixes when the range has a gap
  • Standalone Door: the Door Panel unit type is renamed Standalone Door, and it now works as an applied front with no toe kick
Improved
  • Right-drag pans and the mouse wheel zooms on every 2D and 3D view, including the label designer and print previews. A right-click without dragging still opens the menu
  • Hinge side adjustment and cup move are each entered as one plus-or-minus figure
  • Door profiles now show on panelized ends
Fixed
  • Hinges with side adjustment saved as a positive number lost half their overlay range. Existing hinges were corrected
  • The Doors shop worksheet could draw a door blank, and a part row could select the wrong board
  • A cabinet's bill of materials could take door parts from the other door of a pair
  • An open wall end could hide a cabinet's finished end. Only a wall that turns the corner hides it now
v0.51.0

Countertop Materials, Door Profiles and Panel Ends

New
  • Countertop materials: pick a deck and backsplash material on the countertop standard, then override it on a project, room or single piece. It shows in 2D, 3D and on customer share links
  • Every shop gets a Grainwork Starter countertop standard with a 1-1/2" laminate top to start from. Shops that already have a countertop standard keep their default
  • Countertop quote in Reports: one line per material, with the quantity in the unit that material is sold by
  • Glass door panels: a new Glass material type, sold by the square foot, that looks like glass in 3D and is kept out of machining
  • Door profiles: choose outside edge, inside edge, flat panel and raised panel profiles for a project, room, area, cabinet or single door, drawn in both 2D and 3D
  • Arched top and bottom rails on any door, set in the door layout popup
  • Panel groove depth on door standards, with an override on each door
  • Panel ends are their own component with their own construction settings, separate from finished ends
  • Rail Alignment for panel ends: a panel end's rails line up with the neighboring doors and drawer fronts, and middle rails are added and removed for you
  • Dimension settings for every drawing view, including all cabinet and part views. Back, right and bottom views follow their pair until you split them
  • Text size per view in the drawing theme, so plan text can be larger than cabinet view text
  • Flip hinges from the room: right-click a cabinet, or use the new Hinge section in cabinet properties
  • Grain column in the Machine Code parts and sheet tables
Improved
  • The drawing theme editor is reorganized into line styles, views, dimension style, text and symbols, with a live preview
  • Grain is now stored along each part's own length, so nesting lays face frame rails and door parts the right way. Saved settings were converted, so existing jobs cut the same as before
  • Doors keep their own settings and pull placement when you change a cabinet's face layout
  • A duplicated cabinet shows its doors the moment it is dropped
  • Deleting a wall now asks first and lists the cabinets, openings and appliances that go with it
  • The cabinet standards preview follows the unit type you pick, and settings inherited from a parent unit type show correctly
Fixed
  • Drawer box bottoms took the sides' material instead of the bottom material
  • Doors and drawer fronts could turn yellow in 3D at some zoom levels
  • Deleting a profile could fail
  • Appliance info lookup missed sizes on some retailer pages
v0.50.0

Reveals Against Cabinets and Per-Company Unit Types

New
  • Reveals now understand a cabinet butted against another cabinet, so the gap between two cabinets is set on its own rather than borrowing the wall or end reveal
  • Unit types can carry per-company settings, so a shop can set its own defaults on a type without waiting for the global one to change
Improved
  • Elevation views hide and order parts more accurately, so what you see matches what is actually in front
Fixed
  • Standards could not be saved. Two internal checks were looking for a piece of data that moved during the database migration, which blocked every save
  • Three feature videos were missing their length, so they showed no duration until played
v0.49.2

Behind the Scenes

Improved
  • Groundwork for how updates reach Grainwork, so releases arrive more reliably
v0.49.1

Faster Everywhere

Improved
  • Grainwork now runs from a data centre next to its database, so pages and 3D views load noticeably quicker
v0.49.0

Cabinet Edges, Maintenance Mode, and Countertop Ordering

New
  • Cabinet edges: pick an edge from the new column and set everything about it in one place, with the canvas turning to show that edge face-on and the 3D view following your selection
  • Toe kick now lives on the front edge, and can be set for all faces at once or just the face you are on
  • Independent top and bottom nailers, each with its own edge banding, rear placement and joint to the back
  • Maintenance mode: close the site for a window from system settings, with staff still able to get in
Improved
  • Countertop ordering moved into the properties panel, so it sits with the rest of a countertop's settings
  • Joinery and drawer guide editors rebuilt so a value you type is the value that saves
  • End Types and Toe Kick tabs retired, their questions now on the edge they belong to
Fixed
  • In a face-frame cabinet, the top and the ends now line up on the same back plane
v0.48.0

CAD Units, Deck Inclusion, and Faster Editors

New
  • Deck inclusion settings for panels and fillers, so you can say which decks a panel or filler runs past
Improved
  • CAD tools now respect your unit settings, with better grid handling across the wall, elevation, cabinet and part views
  • Standards, drawer box type and component editors load faster and show clearer loading states
v0.47.0

Moldings, Crown Heights, and Joinery Detail

New
  • Moldings: select a molding in the room and edit it from the properties panel, with live updates in elevation and 3D
  • Crown from ceiling and toe height are now project and area settings, so a whole room can be set once instead of cabinet by cabinet
  • Grain direction can be set per part from the part properties panel
  • Nailers: build a cabinet with top and bottom nailers, including how each one meets the back
  • Inset front fitting: set a door or drawer front as physically inset independently of how reveals are edited
  • Split a deck at an interior divider, so the top or bottom runs past the divider the way it is actually built
Improved
  • Joinery detail screen reworked, with clearer joint settings and frame end positioning
  • Expanded annotation properties in the room canvas
  • Machine detail and test cut screens tidied up
v0.46.0

Countertops, Profiles, and Joinery Allowances

New
  • Countertops: draw and edit countertop shapes directly in the room, with corner radii, edge profiles, and waterfall edges
  • Countertop cutouts for sinks and cooktops, including apron-front notches, with warnings when a cutout will not fit
  • Seam and join countertop pieces by hand, and rebuild only the pieces you select
  • Profiles library: a shared catalog of shapes for countertop edges, crown, baseboard, and door profiles, with a shape editor that supports curved segments
  • Joinery allowances for dado width and tenon sizing, so joints can be tuned to how your shop actually cuts
  • Flip and mirror options on joinery, so one preset can serve both orientations
  • Corner treatment options for part shapes
  • Companion SKU handling in the system hardware catalog
  • Leveler map editor for assigning leg levelers across cabinets
  • Laminate as a material type
Improved
  • Test cut: new stops and clearer material handling
  • The system hardware catalog hides the price column when there are no list prices
  • Joinery details are easier to read in both the list and detail views
  • Pricing page now states $99 per user per month, and clarifies that only users making changes need a paid seat

August 2026

v0.33.0 to v0.45.1
15 releases · 103 changes
v0.45.1

Shirt QR Code Fix

Fixed
  • Fixed the QR code links on IWF shirts sending scanners to a sign-in wall instead of the intended page
v0.45.0

Leg Levelers, Wood Range Hoods, and Tray Dividers

New
  • Leg levelers: add and configure adjustable leg levelers on cabinets, with full hardware catalog and mapping support
  • Wood range hoods: build parametric wood range hoods with a dedicated Hood tab for shaping and profile options
  • Tray dividers: add tray dividers as a new interior component, with fit and shape options
  • Cabinet size rules: set minimum/maximum dimensions on cabinet types, with warnings when a cabinet is resized out of spec
  • Trackers now support an expected date, shown on tracker details and support messages
  • Shop worksheets: toggle a 3D assembly view and switch between list/card print layouts
Improved
  • Filler return settings can now be edited per contact scenario
  • Top stretcher sizing is easier to configure, with better grain orientation handling
  • Cabinet top-view visibility improvements
Fixed
  • Resolved an issue where some support tracker information could fail to load
v0.44.0

Support Trackers & Customer Share Pages

New
  • Support Trackers — a new ticket type for tracking known issues, with public visibility and follower notifications when a tracker resolves
  • Cabinet numbering shown automatically in the cabinet ribbon, based on position along the wall
  • Customer share pages redesigned with a new cover, appliance and cabinet summaries, and sharing settings
Improved
  • Cabinet placement near wall obstructions and openings now snaps and avoids them correctly
  • Toe-kick front now correctly occludes parts behind it in 2D views
  • Tool overcut field now says "None" instead of "Default" for clarity
  • Machine setup flow streamlined
v0.43.0

Help Videos & Dimension Snapping

New
  • Video support in help articles, with chapters and spotlight highlights
  • Live snapping feedback while placing dimensions
Improved
  • Dimension lines and annotations easier to select and interact with
  • Machine setup now warns before skipping a step, since it can't be undone
  • Clearer navigation on the test cut screen
  • Tool stepdown input reflects your selection more accurately
  • Door front-mount defaults on face-frame cabinets corrected
v0.42.0

CAD Annotations & Machine Setup Wizard

New
  • CAD annotations — add text notes, callout boxes, leader lines, and freehand ink directly on plan and elevation views
  • Guided machine setup wizard — step-by-step setup (identity, origin, table, tools, files) with a redesigned test cut flow and failure diagnostics when a cut doesn't pass
  • Multi-split tool — split a cabinet face or interior into multiple sections in one step
  • Wall tee (T-junction) handling in the plan view
  • Public waitlist update archive — view past waitlist announcement emails
Improved
  • Tool palette reorganized into clearer groups for structural and dimension tools
  • Face frame now correctly occludes parts behind it in front and side views
  • Cabinet back scribe gap and "inherit" behavior refined for face-frame standards
  • Machine detail page now offers relevant outline data based on machine performance
  • Tool stepdown input reflects server-side rules more intuitively
v0.41.0

Sheet Simulation

New
  • Face frame scribe option — a new edge treatment setting for face frames
  • Shelf Fit setting — configure adjustable shelf clearances (front, back, ends) per standard
  • Top stretcher component role — a dedicated top-stretcher part type with its own inclusion setting
  • HOMAG added as a supported CNC machine brand
  • Measure tool on the sheet simulation view — measure directly on a part layout before cutting
  • Materials view toggle in the Output tab — switch between viewing sheet parts by component or by material
Improved
  • Sheet simulation — clicking a part now selects and highlights it, with texture shown per material
  • Run sheets and sheet simulation visuals refined
v0.40.0

Sheet Simulation & Face Frame Toe Control

New
  • Sheet cutting simulation — a 3D preview of the machine running a saved sheet before you cut it
  • "Face Frame Runs to Floor" setting — choose whether outer face-frame stiles reach the floor or follow the end's toe notch
  • Filler end depth control — set a partial-depth return on filler cabinet ends, including a "No Return" option
  • Screenshot and screen-recording attachments when submitting a support ticket
Improved
  • Address and map lookups now show a clear message when Mapbox can't be reached, instead of failing silently
  • Machine bed preview more accurately reflects the pack corner for CNC setup
v0.39.0

Toolpath Preview & Tool Catalog Expansion

New
  • Toolpath preview overlay on saved sheets in the Output tab — see the cut path before running the job
  • Amana and Vortex added to the system tool catalog
Improved
  • Dimensions now display consistently across tool and cabinet views
  • CNC bed preview more accurately shows the pack corner and stock orientation
Fixed
  • Customer share links could show a blank page
v0.38.0

Starter Unit Presets

New
  • New shops now get a set of editable starter unit presets out of the box, ready to place and customize right away
v0.37.1

Signup & Seat Billing Fixes

Fixed
  • New shop creation failed during signup, leaving an account with no shop
  • Subscription checkout quoted a single seat instead of your actual designer count, causing an immediate proration after payment
  • Seat counts stopped updating for shops without an active subscription
v0.37.0

Machine Output Tab & Countertop Finishes

New
  • Output tab rebuild — generate CNC machine code, parts lists, and run sheets for a room
  • Per-part output settings — choose which parts show in reports vs. machine output, with per-edge oversize allowances
  • Countertop finish selection on countertop properties
  • Clipped-back position control (outside/inside) for corner cabinet standards
  • Machine gates — restrict what stock kinds and components a machine is allowed to cut
  • Beta program agreement step during signup
Improved
  • Finish color picker and surface finishes section reworked
  • Hardware admin edit pages
Fixed
  • Signup form now shows the real error instead of a generic "Something went wrong"
  • Stripe checkout was broken on preview deployments (test vs. live price mismatch)
v0.36.0

Beta Access & Material Species Guidance

New
  • Beta access program — redeemable beta codes let invited shops in even while public signup is closed
  • Material species guidance to help with material selection
Improved
  • Public pages (marketing, blog, changelog) load more reliably and perform better
Fixed
  • Beta invite codes now correctly get you past the closed signup screen
v0.35.0

Output Settings, CNC Toolpaths & Hardware Catalogs

New
  • Output settings — control oversize/rough-cut dimensions per component and part, both in standards and on individual cabinets
  • SKU code management for door standards and drawer guides
  • Expanded hardware and material catalogs — EGGER decors, Salice hardware, Frost tools
  • NewCNC post processor parity for ramp entry, centerline/radius toolpaths, and ranked overcut settings
  • Machine tool management with detailed CAM settings
Improved
  • Nesting and offcut management
  • Door and cabinet banding during nesting
  • Auto-naming descriptions for cabinet components
  • Corner cabinet behavior and cleanup ahead of beta
  • Pull hardware map trim options
  • New team member welcome emails during onboarding
v0.34.0

Furnishings & Corner Cabinet Components

New
  • Furnishings — add room-anchored decor and fixtures (rugs, plants, art, and more) to your designs
  • Corner cabinet components — clipped-back role support, rounded corners, and improved side-view banding
  • CNC machine test cuts for dialing in new equipment
Improved
  • Species selection and material maps interface
  • AI rendering now tracks declined suggestions
Fixed
  • Corner cabinet projection accuracy in elevation views
v0.33.0

Custom Parts, Corner Cabinets & Countertop Standards

New
  • Custom parts — add fully custom parts to any cabinet, with formula-driven sizing and snapping to cabinet datums
  • Corner cabinet connector hardware (Rafix) for joining corner cabinet cases
  • Countertop standards library with per-piece settings
  • Pull hardware maps — configure pull rail references and per-cabinet pull overrides
  • Vendor records now accept free-text vendor names, not just catalog matches
  • Tenon joinery type and lap joint improvements
  • CNC machine test cuts
  • Automatic end panel parameters for cabinet ends
  • Default cost tracking for tools, with bulk-edit support
  • Help docs foundation with typo-tolerant search
  • Terms of service agreement required when accepting a team invite
Improved
  • Wall opening detail configuration
  • Customer activity tracking now records when an activity occurred
  • Hardware editing with pull geometry and drilling options

July 2026

v0.31.0 to v0.32.0
2 releases · 19 changes
v0.32.0

Drawer Stretchers, Guide Boring & Joinery Expansion

New
  • Drawer stretcher support — a new component role with its own slot and edge constraints
  • Drawer guide boring — automatic hole placement for guide-mounted drawers
  • Automatic drawer box dimensions and height overrides per opening
  • Rollout clearances and finger-pull option for roll-out drawer fronts
  • Hinge door boring support
  • Customizable material table columns — choose which columns show, their order, and page size
  • Hardware pieces-per-unit tracking
  • Lap joinery, end-to-floor joinery, and toe-side-adjacent joinery options
  • Interior dividers can now be positioned proportionally
  • Toe front inclusion is now a configurable standard parameter
Improved
  • Toe kick divider spacing and wording
  • Material stock length and unit-of-issue handling
Fixed
  • Drawer guide operations rendering correctly in the 3D view
v0.31.0

Face-Frame Cabinets & Hinge Configuration

New
  • Face-frame cabinet construction — build face-frame cabinets with customizable member widths and positioning
  • Expanded hinge and plate configuration — integrated or separate plate modes, mounting hole specs, and overlay policies
  • Pair-door gap is now configurable on standards
Improved
  • Interior split behavior for cabinet layouts
  • Door attribute overrides now apply correctly across rendering
Fixed
  • Reveals warning tab

June 2026

v0.18.0 to v0.30.0
17 releases · 99 changes
v0.30.0

Surface Finishes & Cabinet Along Wall

New
  • Surface finishes — configure wall, floor, and ceiling finishes with support for cloning
  • Filler management in the standards editor, including dado depth parameters
  • Cabinet-along-wall placement and hinge fitting visualization in 3D
  • 3D appliance model generation from photos
Improved
  • Wall obstructions — offsets, naming, and surface-finish scoping
  • Door standard usage configuration and panel depth attributes
  • Appliance sizing and offset handling
Fixed
  • Reveals warning tab
v0.29.0

Wall Obstructions & Date Formatting

New
  • Wall obstructions — mark obstructions (windows, outlets, plumbing) directly on room walls, with support for cloning
  • Company default date format — choose how dates display throughout your account
Improved
  • Drawing sheet fields and title blocks
  • Presentation zoom and scrolling behavior
  • Split-thickness joinery handling with hinge standards
v0.28.0

Hinge Standards & Drawing Templates

New
  • Hinge standards — configure hinge overlay, reveal, and boring settings per cabinet standard
  • Drawing templates — reusable templates for your drawing sets and assembly sheets
  • Customer data import — bring in customer records via import job
Improved
  • Cabinet parameter answers now keep a version history
  • Presentation and drawing set generation
  • PDF rendering pipeline reliability
v0.27.0

Hinge Catalog & Project Status

New
  • Hinge catalog — add and manage hinges with hinge maps and scope configuration
  • Door fitting reveals — configure reveal settings for door standards
  • Project opportunity status — track the sales stage of each project
Improved
  • Split-thickness joinery is now accessible directly in the cabinet workspace
  • Dashboard and project detail views
  • PDF rendering quality and reliability
v0.26.0

Project Versioning & Drawing Themes

New
  • Project versioning — save snapshots of your projects and clone them to start new variations
  • Company drawing themes — customize the visual style of your drawings and elevations
  • Project export storage for generated files
Improved
  • Split thickness joinery resolver accuracy and edge cases
  • Customer name handling and dialog components
  • Drawing theme rendering and defaults
v0.25.0

Jobs Platform & Account Management

New
  • Background job platform — powers server-side processing for exports, rendering, and more
  • Priority support message email notifications
Improved
  • Company settings now live under your Account section for easier access
  • Profile management and navigation routing
v0.24.0

Member Capabilities & Email Settings

New
  • Member capability flags — control what each team member can access within your company
  • Email footer settings — customize the footer shown on outgoing emails
  • Email suppression management — manage unsubscribes and suppressed addresses
Improved
  • Feature page editor now supports video duration
  • Analytics consent handling
v0.23.0

Business Onboarding & Joinery Improvements

New
  • Google Business search during onboarding — find and import your business details automatically
  • Split thickness joinery is now configurable directly in the standards wizard
Improved
  • Drawer guide joinery resolver accuracy
  • Customer CRM data model improvements
Fixed
  • Door materials not updating when changed
v0.22.2

Beta Page Fix

Fixed
  • Beta sign-up form height now displays correctly
v0.22.1

Beta Page

Improved
  • Beta sign-up page is now publicly accessible
v0.22.0

Cabinet Splits & CNC Machine Management

New
  • Cabinet part splits — divide cabinet interiors into sections directly in the workspace
  • Split drawers now render correctly in the 3D view
  • Split thickness joinery — automatically apply joinery at part split lines
  • CNC machine management — add your machine brands, models, and equipment types in admin
  • Drill bank catalog — configure drill block setups for your CNC machines
  • Door standard construction and attribute configuration
Improved
  • Door standard components and branch usage configuration
  • Features page design and performance
  • Admin views for machine and equipment management
v0.21.1

Drawer Guide & Hardware Refinements

Improved
  • Drawer guide vertical position and hardware map resolution improvements
  • Internal door standard schema cleanup for better performance
v0.21.0

Miter Joinery & Billing

New
  • Miter joinery type — configure miter cuts directly in your joinery settings
  • Drawer guide bottom-mount option for hardware map guides
  • Billing and subscription management — manage your Grainwork plan from account settings
  • Features page on the Grainwork website
Improved
  • Wall canvas now shows cleaner dimension labels
  • Sign-up flow is smoother and handles more edge cases
  • Email campaign body rendering with better template support
  • Notification preferences — control which notifications you receive
  • Support messaging: reply threading and real-time updates
Fixed
  • Login issues affecting some users
v0.20.0

Drawer Box Configuration & Support Messaging

New
  • Set a default drawer box type per room or area, so new cabinets inherit the right box automatically
  • Hardware map guides now support named sizes with custom clearances for precise drawer box fitting
  • Built-in support messaging — start a conversation with Grainwork directly from the app
  • Support inbox for Grainwork team to manage and respond to customer messages with ticket types and status tracking
  • Dimension input field in cabinet layout view for quick size entry
Improved
  • Drawer box edge banding rules now account for part role and shape
  • Drawer box guides: static height options, joinery rules, and preview settings
  • Hardware map schedules with per-guide size configuration
  • DXF export and cabinet depth handling refinements
v0.19.1

DXF Export and Analytics Fixes

Improved
  • PostHog analytics — improved user identification and routing for more reliable usage tracking
Fixed
  • DXF export — shaped and notched cabinet ends now render as solid faces instead of open geometry
  • DXF export — through cuts now display as real openings with correct depth
  • DXF export — toe recess positioning now correctly reflects setbacks in both the canvas and DXF output
  • 3D canvas — fixed double lines appearing on pocket operations in part views
v0.19.0

Drawer Boxes, Schedule Meeting, and Toe Kick Options

New
  • Drawer boxes & guides catalog — manage drawer box types and drawer guides in the admin, assign them per cabinet, and see them in output reports
  • Schedule meeting page — add a scheduling page to your shop's app so customers can book time with you
  • Toe kick options in standards — configure toe kick treatment per cabinet component with joinery connection previews
  • Outputs tab — new dedicated tab in the project workspace for viewing cut lists and output reports
Improved
  • Material grain direction — updated to length/width options with a live 3D preview when editing materials
  • Shaped cabinet parts — more accurate corner and diagonal cabinet footprints in the side view and 3D canvas
  • Material maps navigation — selections now persist in the URL so navigating away and back keeps your place
  • Standards branch management — improved UI with dropdown menus and confirmation dialogs for managing standard branches
v0.18.0

Ask Grainwork AI Assistant, Enhanced Cabinet Shaping, and Material Import

New
  • Ask Grainwork AI assistant — new intelligent assistant available throughout the application to help with project planning, design suggestions, and workflow guidance
  • Finished ends system — comprehensive end-type and joinery framework for precise cabinet construction specifications
  • Cabinet shaping — live generation of shaped cabinet parts with improved UI for drawing and editing custom footprints
  • Species-driven material import — faster material setup by importing multiple species and their variants in one action
  • Resolved parts database sync — automatic synchronization of cabinet parts and materials to the database for better reporting
Improved
  • Cabinet design workspace — enhanced shape editing with properties panel for point and line adjustments
  • Material management — streamlined workflow with new bulk import dialog and species-focused organization
  • Admin interface — expanded AI settings and model configuration for advanced users
Fixed
  • Cabinet shaping — fixed critical issue where shaped parts weren't updating based on drawn footprint

May 2026

v0.7.0 to v0.17.0
19 releases · 94 changes
v0.17.0

Finish Assignments, Hardware Catalog, and Company Pages

New
  • Finish assignments system — assign custom finishes to individual cabinet parts with per-part overrides and a visual finish maps editor
  • Hardware catalog management — new admin section for organizing and managing hardware types and specifications
  • About page — company information and founder profiles
  • Contact page — direct inquiry form for customer support and partnerships
  • Blog RSS feed — improved feed generation and RSS link on landing page for easy blog subscription
Improved
  • Finish management workflow — streamlined finish color handling and inheritance controls across project editing
  • Navigation — cleaner sitemap and improved layout consistency throughout the design workspace
  • Blog responsiveness — enhanced carousel and media handling for better mobile experience
v0.16.0

Wall Openings, Standards, and Performance

New
  • Wall opening management in elevation view — create, delete, and customize doors and windows directly in your project layouts with an intuitive context menu
  • Construction standards integration — apply construction standards to projects, rooms, and cabinets for consistent material and finish specifications
  • Species override functionality — override species assignments for material maps during project editing for greater control over finishes
  • Adjustable shelf operations — fine-tune shelf positioning and linebore operations within cabinet and part workspaces
  • Google Analytics tracking — usage analytics to help us improve the application based on real user workflows
Improved
  • Cabinet resolver performance — added detailed performance tracing for faster and more reliable cabinet resolution
  • Reference catalog system — new client-side caching layer for improved responsiveness when working with materials, standards, and specifications
  • Material assignment workflows — streamlined handling of material maps and species assignments across project editing
Fixed
  • Preset designer freshness — resolved issue where saved presets weren't properly validating recent changes
v0.15.0

Interior Sections, Dividers & Naming Profiles

New
  • Interior face sectioning — divide a cabinet face into sections for more detailed front layout control
  • Interior dividers — add vertical divider parts inside cabinet interiors
  • Naming profiles — new token based auto naming system with dimension formatting options and preset compatibility
  • Blog RSS feed — subscribe to the Grainwork blog via RSS
Improved
  • Auto name editor now saves drafts locally so work is not lost on page reload
  • Standards and naming profiles now show a pending changes indicator when there are unpublished edits
  • Standards list can now be sorted by sort order
  • SKU generation now includes room and cabinet context for more accurate codes
  • Unit type presets updated with improved compatibility
v0.14.1

Landing Page & Content Updates

Improved
  • Landing page copy updated for better clarity and engagement
  • Manifesto page updated with additional context
  • Pricing page updated to clarify early access details
v0.14.0

Linebore, Adjustable Shelves & Dashboard

New
  • Linebore for shelves — configure linebore settings in your standards for shelf hole drilling
  • Adjustable shelves in cabinet interior layout — add, position, and manage adjustable shelves directly in the interior editor
  • Designer dashboard — new overview page with project activity and stats
  • Email body editor — rich text editing for email campaigns
Improved
  • Standards editor now auto-saves as you make changes, no more manual save button
  • Resizable standards panel for more comfortable editing
  • Cabinet creation is now faster with optimistic UI updates
  • Significant performance improvements to the cabinet workspace and room designer
  • Changelog page is now publicly accessible
v0.13.0

Adjustable Shelves & Interior Layout

New
  • Adjustable shelf support in standards — configure preferred spacing and preview positioning for adjustable shelves
  • Interior layout view improvements — better visibility and editing of interior parts
  • Face openings interior type — new interior type option for face openings
  • Room workspace expanded with more controls
Improved
  • Email delivery logs capture full event detail for easier troubleshooting
v0.12.3

Email Webhook Fix

Fixed
  • Further improvements to email delivery webhook reliability
v0.12.2

Email Logging & Public Changelog

New
  • Public changelog page added at grainwork.io/changelog
Improved
  • Email delivery logs now capture more detail for easier troubleshooting
  • Email webhook handling improved with better logging
v0.12.1

Email Webhook Fix

Fixed
  • Email delivery webhook corrected for improved reliability
v0.12.0

Email Campaigns & Notification Settings

New
  • Email campaigns — create and send email campaigns to your users from the admin panel
  • Email notification settings — configure automatic email alerts when project statuses change
  • Notification preferences — users can manage their own email notification settings from their profile
  • New user signup notifications — admins get notified when someone new signs up
  • Changelog editor — manage changelog entries directly from the admin panel
Improved
  • Email settings updated with separate From name and From email fields
v0.11.0

Layout Variables, Unit View & Joinery Improvements

New
  • Unit view tab in the cabinet workspace — see and manage the cabinet type and preset directly from the cabinet editor
  • Layout variables — set default wall heights and dimensions at the room or project level so new cabinets inherit your shop defaults automatically
  • Cabinet context menu expanded with more quick actions in the room designer
Improved
  • Joinery rules in standards now support per-side adjustments and new conditions for bottom and end connections
  • Area settings updated to support layout variable inheritance
  • Add cabinet from preset sheet improved with better filtering and options
Fixed
  • Door opening type handling corrected
v0.10.0

Cabinet Types, Auto-Naming & Blog

New
  • Cabinet type system — define unit types, sub-types, and presets so you can add standard cabinets from a catalog instead of building each one from scratch
  • Auto-naming for cabinets — cabinet codes can now be generated automatically based on your naming rules
  • Blog on grainwork.io — full blog with search, authors, and posts
  • Legal pages (Terms, Privacy) are now managed through the admin panel
Fixed
  • Social share links on blog posts
v0.9.2

Performance Monitoring

Improved
  • Added performance monitoring to help identify and improve slow load times
v0.9.1

Analytics & Collaboration Polish

Improved
  • Collaboration cursors scale and position more accurately at different zoom levels
v0.9.0

Blind Dados, Live Cursors & Workspace Overhaul

New
  • Blind dado joinery — qualified blind dados can now be configured and render correctly in cabinet side and 3D views
  • Live cursors in the room designer — see your teammates' cursor positions in real time
  • Collaboration color picker — each team member can choose their own color for collaborative presence
  • Forgot password and reset password pages added
  • Texture dialog improvements — lock tile aspect ratio and preview images when configuring materials
Improved
  • Cabinet workspace reorganized into dedicated tabs: Face, Interior, Toe Kick, and End Types
  • Properties panel overhauled with dedicated sections for cabinet, wall, and door style properties
  • Elevation view accuracy improved for banding on shaped parts
  • Standards editor broken into focused sections for easier configuration
Fixed
  • Edge banding thickness validation improved — more accurate part dimensions
v0.8.0

Toe Kick, Back Panels & Collaboration

New
  • Toe kick configurations — choose integrated toe, ladder base, or adjustable legs per cabinet
  • Back panel support — assign unfinished or finished back panels to cabinets
  • Real-time collaboration — see who else is working in a project or room, with conflict alerts when multiple users edit the same cabinet
Improved
  • Part view updated with clearer edit operation controls and icons
Fixed
  • Edge banding assignments now display correctly in the 3D cabinet and room viewers
  • Edge banding on shaped parts renders accurately in 3D
  • Various edge banding calculation issues resolved
v0.7.2

Build & Deployment Fixes

Fixed
  • Resolved deployment errors affecting the live site
v0.7.1

3D Viewer Flickering Fix

Improved
  • Joinery functionality updated with dependency improvements
  • Text and label consistency improved across the app
Fixed
  • 3D cabinet viewer flickering — improved lighting setup and rendering stability
v0.7.0

Wall & Door Style Updates

Improved
  • Wall management has new features for better room layout control
  • Door style management has been updated with a refined interface
  • Cabinet and wall layout rendering has been improved
  • Landing page updated with screenshots
Fixed
  • Errors that caused some pages to fail to load

April 2026

v0.1.0 to v0.6.0
7 releases · 38 changes
v0.6.0

Cabinet & Settings Improvements

Improved
  • Cabinet component management has been enhanced with additional controls and options
  • Project settings have been updated with more configuration options
  • Error detection has been improved behind the scenes to help catch and fix issues faster
Fixed
  • Errors that caused some pages to fail to load
v0.5.0

Cabinet Controls & UI Refinements

Improved
  • Cabinet properties now include rotation handling for more precise placement control
  • Category management interface has been updated with a cleaner layout
  • Component role handling is more reliable across the board
  • Landing page has been refreshed
Fixed
  • Texture display issue on edges that had an operation applied
v0.4.0

Material Maps & Team Management

New
  • Material map overrides — assign specific materials to components and categories, with the ability to override defaults per schedule
  • Material thickness support — specify and track thickness values on sheet and board materials
Improved
  • Invitation acceptance and team management interface has been refined
Fixed
  • Deployment errors that caused some pages to fail to load
v0.3.1

Invitation & UI Polish

Improved
  • Invitation flow has been updated with a smoother experience for accepting and managing team invites
v0.3.0

Projects & Materials Overhaul

New
  • Kanban board view for projects — see all your jobs organized by status at a glance
  • Customizable project statuses — define the stages that match your shop's workflow
  • Company branding settings — add your logo, tagline, and brand colors to your account
  • Location field on projects — attach a job site address to each project
Improved
  • Materials list and detail pages have been redesigned with a cleaner table layout and more information at a glance
Fixed
  • Login issue that could prevent access after certain session states
  • Deployment errors that caused some pages to fail to load
v0.2.0

Projects, elevations, and a 3D view

New
  • Projects and customers — organize work by job and who it's for
  • Project canvas for laying out rooms and areas
  • Wall elevation view to design against the wall you're building
  • 3D view to see the room come together
  • Bulk select for cabinets — edit several units at once
Improved
  • Smoother, more predictable wall and cabinet resizing
  • General user interface polish throughout
v0.1.0

Hello, Grainwork — first release

New
  • Sign up, sign in, and a working dashboard
  • Company profile with multi-company switcher in the top bar
  • User profile menu and account settings entry points
  • Sidebar navigation and top bar layout
  • Materials page — start building your catalog
  • Components page — define the parts that make up your cabinets
  • Material Maps page — wire components to materials
  • Material Settings page — material types and units of issue
  • Textures and finish colors on materials
  • Landing page with basic SEO